i noticed that the picture battery light from my instrument cluster wasn't turning on and there wasn't enough energy going through the wire to the regulator to turn on the alternator. i opened up the instrument cluster and i noticed that my resistor
Check all relays and grounds. Even add a ground for the fun of it . It is a Ford
PaulP
the large wet batteries I have . The field of this alternator is excited and controlled by a resistor so that the output can be adjusted. Set to ...
correct engine before ordering Alternator brackets. GM and Chevy had different engines, and the brackets are different for the alternator. Make ...
Modifying BMW airhead Alternator lamp circuit ... The resistor should be secure from vibration by cementing it with a very tiny bit of silicone RTV or similar. ...
ALTERNATOR CHARGING SYSTEMS. BATTERY ELECTRICAL. BOOKS AND CATALOGS. 12V ELECTRICAL SWITCHES ... INFORMATION ON INSTALLING THE DELCO ALTERNATOR EXCITATION RESISTOR ...
Remove the 40 OHM resistor from inside the alternator before installing this excitor resistor. NOTE: Draws 70 Milliamps (70/1000) amp all the time. ...
The protective resistor is electrically connected between the ... The brushless alternator as set forth in claim 3, wherein the protective resistor is cylindrical in shape and ...
The resistor is necessary to provide the initial load to alternator. ... Make sure the resistor is rated for the current that will flow through it. ...